JUST ADD YOUR MICRO RX TO GET FLYING
EMAX Babyhawk 85mm Mirco Brushless FPV Racer
All-in-One Camera and VTX 25MW CMOS
Femto F3 FlightController/PDB board with built-in 5v 3A regulator with LC Filter
Bullet 6A BLHeli_S Plug-In ESCs
1104 5000kv Brushless Motor
85mm Molded PC Plastic Body/Frame
85mm Molded PC Plastic Motor Guards
Babyhawk + 2.3" Propellers = 60g
Babyhawk + 2.3" Propellers + Motor Guards = 68g
Babyhawk + 2.3" Propellers + 2S 300mah lipo = 78g
Babyhawk + 2.3" Propellers + Motor Guards + 2S 300mah lipo = 86g
(NOTE:Just need pwm, ppm, sbus ready Radio Receiver to make PNP fly)
-All-in-One Camera and VTX 25MW CMOS
-Femto F3 FlightController/PDB board with built-in 5v 3A regulator with LC Filter
-Bullet 6A BLHeli_S Plug-In ESCs
-1104 5000kv Brushless Motor
-85mm Molded PC Plastic Body/Frame
-85mm Molded PC Plastic Motor Guards
EMAX Babyhawk 85mm Brushless Micro Drone (PNP)
Extremely good almost ready to fly. Great video and vtx. Easy to fly and heappppppppsssss of power on 3s!
Emax pnp babyhawk, awesome quad, flashed to the latest betaflight 3.1.7 running stock pids and it handles fantastically, enough power for near instantaneous turns.
Only downsides are you will need to take most of it apart to add a beeper, which its sorely missing, no OSD either which is a shame. The battery strap is too long and made from plastic velcro rather than a rubbery type so gripping batteries is a pain, i had to add some extra foam to the 300mah battery to allow them to stay snug.
The esc are also up the wrong way, they come upside down with the 3m tape attached but not peeled. (This may be because of the size of this build you have to move the esc to move the FC)
The FC is a tiny femto F3 board and works great, solder pads for the buzzer are under the board opposite the battery, and the 3.3v for a spektrum sat is on the right boot pad.
The FC board has no mount holes and is "held" down by tape, not very well, after a hard knock it was floating causing drift, i fixed this with different tape and using the beeper to wedge the FC down.
Downsides done, its a rush to fly and is very capable for its size. I would recommend it for anyone looking to step out of brushed micros.